About E2E341L and E2E343- Electronics Laboratory II
Attention to our students taking the Electronics Laboratory II courses coded E2E341L and Electronics Laboratory courses coded E2E343!

The laboratory classes will begin on September 15, 2025. Students who have not received Occupational Health and Safety (OHS) training before, or those who have completed it but it has been more than 3 years, will not be allowed to participate in the laboratory classes.
 
To participate in this laboratory course, students must successfully complete the Occupational Health and Safety Training. Please ensure that you have completed this training through one of the following methods:
 
  • The face-to-face training provided by the university at the beginning of the term (It is held during the 1st or 2nd week of the Fall semester, please follow the announcements on the faculty webpage).
  • The Basic Occupational Health and Safety Training available through the "E-Learning Platform" by the Presidency of the Republic of Turkey, Human Resources Office.
 
Please read the document "lab_grading_rules_term_plan" regarding the semester plan, lab attendance, and grading.
 
Experiments will be conducted weekly, and students enrolled in the laboratory course must attend the class on the specified days and times. Each student can only attend their assigned group.
 
Each student will have an individual lab report. The lab report must be printed in spiral-bound format. The handouts are evaluated and graded by academic staff at the end of each week. Therefore, it is important for our students to attend laboratory classes.
 
A maximum of 2 students can perform the experiment together in each experiment set. The experiment materials are listed on the first page of the lab report and below. Each student must obtain 1 set. All the componets must be obtained no later than September 22, 2025.
 
Please follow the announcements regarding the mandatory OHS training on the faculty webpage.
 
Before attending the class, please read and adhere to the lab rules. Click here for the file.
 
Simulation for the experiments will be done using LTspice software. You can access the lab manual and simulation program via the links below.
 
Note:
Our classes will take place in Room B3-07, the Basic Electronics Laboratory on the 3rd floor of our laboratory building.
 
Files & Program:
 
You can download the lab manual here.
 
You can download LTspice here.
 
Class Schedule:
Group Day Time
%30-I (Section A) Tuesday 12:10 – 13:40
%30-I (Section B) Tuesday 13:50 – 15:20
%100-I (Section A) Wednesday 09:40 – 11:10
%100-I (Section B) Wednesday 11:20 – 12:50
%30-II Wednesday 20:00 – 21:30
 
Component List:
 
Components Min
Quantity		 Recommended Quantity
2N7000 MOSFET 1 2
CD4007 2 2
LM358 OPAMP 1 2
5mm Kırmızı Led 1 3
10 Ω 1 3
50 Ω 2 3
100 Ω 3 5
220 Ω 1 3
330 Ω 1 3
390 Ω 1 3
470 Ω 1 3
1 kΩ 2 3
3.3 kΩ 1 3
3.9 kΩ 1 3
10 kΩ 2 3
22 kΩ 1 3
39 kΩ 1 3
82 kΩ 1 3
100 kΩ 2 3
1 MΩ 1 3
100 nF Polyester Capacitor 63V (nonpolarized) 1 3
10 µF Polarized Capacitor 25V 3 4
470 pF Ceramic Capacitor 63V (nonpolarized) 1 3
100 pF Ceramic Capacitor 63V (nonpolarized) 1 3
17 cm x 5.5 cm Bread Board 1 1
Male-to-male jumper wires set (40 pcs / 10cm) 1 1
Protection Goggles 1 1
Multimeter 1 1
 
 
Eklenme Tarihi: 8 September Monday, 2025
Son Güncelleme Tarihi: 17 September Wednesday, 2025, 13:25

Copyright © KBÜ
KBÜ