​About E2E343 Electronics Laboratory - For students adhering to the EEE 2023 Curriculum
 The laboratory classes will begin on September 21, 2026. Students who have not received Occupational Health and Safety (OHS) training before, or those who have completed it but it has been more than 3 years, will not be allowed to participate in the laboratory classes.
 
To participate in this laboratory course, students must successfully complete the Occupational Health and Safety Training. Please ensure that you have completed this training through one of the following methods:
 
  • The face-to-face training provided by the university at the beginning of the term (It is held during the 1st or 2nd week of the Fall semester, please follow the announcements on the faculty webpage).
  • The Basic Occupational Health and Safety Training available through the "E-Learning Platform" by the Presidency of the Republic of Turkey, Human Resources Office.
 
Please read the document "lab_grading_rules_term_plan_for_E2E343" regarding the semester plan, lab attendance, and grading.
 
Experiments will be conducted every week, and students enrolled in the laboratory course are required to attend the class on the day and time shown in their schedule.
 
Each student will have an individual lab report. The lab report must be printed in spiral-bound format. Lab sheets are evaluated and graded by lab assistants every week at the end of the session. Therefore, it is important for our students to attend the lab classes regularly.
 
A maximum of 2 students can perform the experiment together in each experiment set. The experiment materials are listed on the first page of the lab report and below. Each student must obtain one set. All the componets must be obtained no later than September 28, 2026.
 
Please follow the announcements regarding the mandatory Occupational Health and Safety training on the faculty webpage.
 
Before attending the class, please read and adhere to the lab rules. Click here for the file.
 
Simulation for the experiments will be done using LTspice software. You can access the lab manual and simulation program via the links below.
 
Note:
Our classes will take place in Room B3-07, the Basic Electronics Laboratory on the 3rd floor of the laboratory building.
 
Files & Program:
 
You can download the lab manual here. (Please print it in spiral-bound format).
 
You can download LTspice here.
 
 
 
 
Component List:
 
Components Min
Quantity		 Recommended Quantity
2N7000 N-channel MOSFET TO-92 2 3
2N3904 npn BJT TO-92 2 3
1N4148 diode 2 3
3.3V 1/2W Zener Diode DSTK0357 2 2
CD4007 2 2
LM358 OPAMP 1 2
5mm red color LED 3 4
10 Ω, 1/4W 1 3
24 Ω, 1/4W 1 1
33 Ω, 1/4W 1 2
50 Ω, 1/4W 2 3
100 Ω, 1/4W 3 5
220 Ω, 1/4W 1 3
330 Ω, 1/4W 1 3
390 Ω, 1/4W 1 3
470 Ω, 1/4W 1 3
620 Ω, 1/4W 1 1
1 kΩ, 1/4W 2 3
3.3 kΩ, 1/4W 1 3
3.9 kΩ, 1/4W 1 3
4.7 kΩ, 1/4W 1 2
5.1 kΩ, 1/4W 1 2
10 kΩ, 1/4W 2 3
22 kΩ, 1/4W 1 3
24 kΩ, 1/4W 1 2
33 kΩ, 1/4W 1 2
39 kΩ, 1/4W 1 3
82 kΩ, 1/4W 1 3
100 kΩ, 1/4W 4 5
1 MΩ, 1/4W 1 3
100 pF Ceramic Capacitor 63V (nonpolarized) 1 3
470 pF Ceramic Capacitor 63V (nonpolarized) 1 3
100 nF Polyester Capacitor 63V (nonpolarized) 2 3
10 µF Polarized Capacitor 25V 3 4
33 µF Polarized Capacitor 25V 1 1
17 cm x 5.5 cm Bread Board 1 1
Male-to-male jumper wires set (40 pcs / 10cm) 1 1
Protection Goggles 1 1
 
Eklenme Tarihi: 18 September Friday, 2026
Son Güncelleme Tarihi: